TK Products Enclosed Multi-Dog Kennel | Freestanding Indoor & Outdoor Runs
Description
TK Products Pro-Series Enclosed Multi-Dog Kennel - Indoor/Outdoor Wire Kennel
TK Products Pro-Series enclosed multi-dog kennels are fully freestanding, four-sided welded wire kennel systems built for indoor and outdoor use. No wall required. Place them in a garage, barn, yard, utility room, or any open space where you need a secure, permanent kennel run. Available in 2-run through 6-run configurations across a full range of sizes, including the extra-large 10x10-foot run for giant breeds and high-capacity commercial facilities, all units stand 6 feet (72 inches) tall and ship complete with every piece of hardware needed for assembly.
These are the same Pro-Series panels used in the backless configuration, with the addition of a full rear panel on every run. The result is a completely self-contained kennel system that can be positioned anywhere on a flat surface, bolted to concrete, or anchored into grass or pea stone using the optional stainless steel adjustable feet.
AdeoPets has helped boarding facilities, animal shelters, breeders, grooming salons, veterinary practices, and multi-dog households configure TK Products kennel systems for over 7 years. Rated 4.9 stars across 626+ verified customer reviews, our team knows these products thoroughly. If you have questions about sizing, configuration, or building a custom kennel bank, call us at 888-979-5566 or start a live chat.
Key Features of the TK Pro-Series Enclosed Kennel
- Fully enclosed, four-sided freestanding kennel; no wall required
- Hot-dip galvanized after full assembly, 5 mils thick, rated for 100+ year service life per American Galvanizing Association standards
- 1.25-inch square tubing frame with welded mitered corners; closed top prevents debris entry and internal corrosion
- 6-gauge 2x4-inch welded wire mesh; wire ends inserted and welded inside the frame for no exposed sharp edges
- All stainless steel hardware: bolt assemblies, vibration-proof ny-lock nuts, door handles, and door latches
- Spring-loaded stainless steel lockable door latch with handles on both sides; one-handed operation; accepts padlock or carabiner
- 2-foot-wide door panel swings in or out; reversible for left- or right-hand installation; lifts free at 90 degrees for easy cleaning
- Panels raised 2 inches off the ground on plastic leg inserts for spray-out cleaning; optional stainless steel adjustable feet available for 2, 3, or 4-inch height on sloped concrete or soft ground
- Optional isolation panels in non-toxic black HDPE composite, 48 inches tall, for visual separation between runs
- Optional top mesh panels available for most popular sizes
- Available in 2-run through 6-run configurations; custom multi-run banks available on request
- Sizes from 3x4 up to 10x10 feet per run; all units 6 feet (72 inches) tall
- 5-year manufacturer warranty
- Made in the USA
** Note: kennels cannot be returned or exchanged
Why Buy a TK Kennel
TK Kennels is the industry leader for durability of use for indoor/outdoor dog kennels. Their manufacturing process is unmatched in the industry giving you a quality product that will also for years to come. Each completed panel is hot-dip galvanizing after welding and assembly to give it the strongest finish available (5 mills thick). TK Products is so confident in their product that they offer a 5-Year Manufacturer Warranty, the longest in the industry Other kennels will claim to be of the same quality but few measures up. Read below for all the details.
Custom Configurations and Large-Scale Builds
The standard product page covers 2 through 6-run configurations in the sizes listed above. For buyers who need more, AdeoPets builds custom kennel systems beyond the standard catalog regularly using TK Products panels.
Common custom configurations include 8-run, 10-run, 12-run, and larger kennel banks, back-to-back double rows with a shared centre aisle, L-shaped and U-shaped layouts to fit irregular spaces, and mixed-size installations where different run widths are combined across a single bank. The panels are standard TK Products units. The custom element is the configuration, the count, and the layout planning.
If you are outfitting a boarding facility, rescue organisation, veterinary practice, grooming salon, or any operation requiring more than 6 runs, contact us before placing an order. We will review your space, recommend the right configuration, and provide a written quote. Call 888-979-5566 or start a live chat.
Superior Design
All Pro-Series Kennels are built using 1 ¼” square tubing frame with welded mitered corners giving it superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other major brand kennels have frames that are wide open on top.
The square tube kennel frames provide a more effective means to secure two panels together. The square frame kennels are held together using stainless steel bolt assemblies that are designed to wrap around each frame for increased strength (see pictures above), unlike round tube framed kennels that use a round clamp system which often becomes loose and can rotate. Our bolt assembly includes all stainless steel bolts and vibration proof stainless steel ny-lock nuts. This design was chosen specifically based on years of experience with fail brackets.
Inside the frame is 6 gauge 2x4 welded wire mesh. The inside of the frame is pre-drilled around the entire inner perimeter; then each end of the wire mesh is inserted into the pre-drilled frame and welded around every wire. We have found this to be the most secure way to fasten the wire mesh to the frame while also eliminating exposed jagged or sharp edges that could injure your animal. This design also eliminates rattling of the fence like other chain link versions giving you the quietest kennel possible. Most other brands just weld the wire mesh to the surface of the frame every six to twelve inches which means some of the wire mesh ends can be bent out and injure your pet.
TK kennels are raised 2" off the ground with a leg for easy spray out cleaning and also come plastic leg inserts to help reduce wear and improve the corrosion resistance.
Optionally, we off a Stainless Steel foot that replaces the plastic leg insert and allows the side panels to be adjustable from 2” – 3” – 4” above grade for easy cleaning and sloped concrete installations. The large for is 3 ½” square and allows you to bolt the kennels to the concrete or works very well for placing the kennels on soft surfaces like grass or pea stone.
Door Panels
Each door panel has a 2-foot door which swings in-or-out. The door panel is also reversible offering a right or left-handed installation. The door hinge design allows for the door to be removed by lifting it straight up but only if the door is opened to at least 90 degrees, this is a handy feature for cleaning. These unique features truly make the TK Pro-Series a versatile kennel system.
Door Latch - Spring Loaded
The Door Latch is spring-loaded and made of solid stainless steel with an internal stainless spring that holds the latch shut and prevents your dog from opening the door. There is a handle on both sides of the kennel for ease of use, and the latch is lockable for your pet’s safety. The handle is easily used one-handed to make feeding time a breeze. Each latch has an eyelet that can be used to easily lock using a carabineer or similar item. If you have an escape artist consider upgrading to our quick-locking latch, which can be locked with the press of a button.
Optional Isolation Pannels
TK Isolation Panels are sold separately and a great to keep animals from interacting too much. They are made of a non-toxic black textured HDPE (composite). The HDPE is black all the way through so it will show fewer signs of wear or scratching as compared to steel or galvanized panels. It is impervious to cleaning chemicals and will not corrode or rust even if damaged. All our isolation panels are 48” tall and fastened to our wire mesh side panels using stainless steel brackets and screws. This means the panels can be added, moved or removed at any time to increase ventilation or install where needed.
Optional top Panels
We also offer optional top mesh panels for our more popular kennels. These top panels sit flush inside the kennel on six mounting tabs and held in place using the stainless steel self-drilling mounting screws that come with each panel.
TK Products Comprehensive 5 Year Warranty
- For five (5) years from the date of original purchase, TK Products LLC, warrants to the purchaser of this kennel that,
should it prove structurally defective by reason of improper workmanship and/or material, TK Products LLC, will repair or replace, at its option, any defective part of the kennel, customer is responsible for all shipping. Replacement parts are warranted for the remainder of the original period.
2. THIS WARRANTY DOES NOT COVER damage to the kennel caused by any animal, any physical alterations or abuse to or misuse of the kennel, any damage caused by the original purchaser or any third party, or any defects arising or discovered more than five (5) years from the original retail purchase date.
Frequently Asked Questions
What is the difference between the enclosed and backless TK Products kennel? The enclosed kennel is a fully freestanding, four-sided unit with panels on all sides plus a front door. It requires no wall and can be placed anywhere. The backless kennel has three enclosed sides and is open on the rear, designed to mount flush against an existing wall. Both use identical panels, hardware, and construction quality. If you have no wall to mount against, the enclosed version is the correct choice. If you are building against a wall or setting up an indoor/outdoor through-wall system, the backless version is the right choice.
Can the enclosed kennel be used outdoors year-round? Yes. The 5-mil hot-dip galvanized coating is the same standard used on outdoor infrastructure and is rated for long-term outdoor exposure in all climates, including high-humidity, high-rainfall, and freeze-thaw environments. Optional top mesh panels add weather protection overhead. The base kennel panels themselves require no additional treatment for outdoor use.
What sizes work best for large or giant breed dogs? For dogs over 80 pounds, a 4x8 or 4x10 run provides comfortable movement space. For giant breeds including Great Danes, Mastiffs, Irish Wolfhounds, and similar, a 5x10 or 10x10 run is recommended. The 10x10 configuration is the largest individual run in the TK Products lineup and provides over 100 square feet per dog.
Can I configure more than 6 runs? Yes. TK Products panels are fully modular and AdeoPets builds custom kennel banks with 8, 10, 12, or more runs regularly. We also help customers design back-to-back configurations, L-shaped layouts, and other custom floor plans. Call or chat with us to discuss your project and we will prepare a custom quote at no obligation.
Can interior divider panels be removed to create larger runs? Yes. Interior divider panels can be disconnected and removed if you want to temporarily combine adjacent runs into a larger space. This is common in boarding facilities that need flexibility depending on the size of dogs in their care on any given week.
How long does assembly take? Most TK Products kennel banks can be assembled by two people using basic hand tools in a few hours. All hardware is included. No welding or special equipment is required. Our team is available at 888-979-5566 if you have questions during setup.
What is the lead time and how does shipping work? TK Products kennels are normmaly instock and ship in 7 days from order placement. Orders ship from Michigan via freight carrier on a pallet. The freight company will contact you to schedule a delivery time. You will need two to three people on-site to receive the shipment, as liftgate service is not available for kennel panels. Panels are unloaded from the truck individually by hand.
Is the 5-year warranty transferable? The warranty covers structural defects due to improper workmanship or materials for five years from the original purchase date. It does not cover damage caused by animals, physical alteration, misuse, or abuse. Replacement parts under warranty are covered for the remainder of the original warranty period. Contact AdeoPets at 888-979-5566 or [email protected] for warranty support.
Sizing Guide for Enclosed Multi-Dog Kennels
All TK Products enclosed kennels are 6 feet (72 inches) tall. The width dimension refers to the door panel and the width of each individual run. The length dimension refers to the depth of the run from front door to back panel.
Width options: 3 feet, 4 feet, 5 feet, 10 feet. Length options: 4 feet, 5 feet, 6 feet, 8 feet, 10 feet. Run counts: 2 through 6 in a single bank.
As a general sizing guide: a 3x4 or 3x5 run is suitable for small breeds and puppies. A 4x4 or 4x5 run works well for medium dogs. A 4x8 or 4x10 run gives large breeds comfortable movement space. A 5x8, 5x10, or 10x10 run is recommended for giant breeds, working dogs with high energy needs, or commercial facilities prioritising animal welfare standards.
The 10x10 configuration is the largest individual run in the TK Products lineup. At over 100 square feet per run, it is primarily used by animal shelters, boarding facilities managing large or giant breeds, breeders with multiple dogs per space, and K9 training programs. A 6-run bank of 10x10 kennels represents a full commercial kennel installation.
For custom configurations including larger run counts, unusual floor plan shapes, or back-to-back double-row builds, contact AdeoPets before ordering. We prepare custom quotes at no obligation and can advise on panel count, layout, and logistics for any scale of project. Call 888-979-5566 or use live chat.
Shipping
TK Product Kennels Ship from Michigan via Freight Carrier
- TK Products can take several weeks or more to manufacture, please contact us if you need a specific timeframe for your order.
- Transit times can vary by location and time of year, freight carrier do not guarantee a delivery date, please allow 5-15 days for transit
Freight Shipping
Freight shipping is used when items are over 145 lbs or very large in size. Our standard freight shipping will arrive to you in a tractor-trailer/18-wheeler. Once the freight driver is in your area, they will contact you directly to arrange for a delivery time.
Your order will arrive on a pallet delivered by a commercial LTL carrier. The trucks are usually semi-trucks, tractor-trailers/full-size 18 wheelers. The freight company will call you a day or so before they deliver to schedule a time to deliver. You will need to have help ready when your shipment arrives as the freight driver will not unload for you. If you do not have a forklift, the pallets of kennels can be unwrapped on the truck and each kennel panel can then be easily lifted off the truck.
Liftgate Service:
Because of the large size of these kennels, a liftgate is not an option. The kennel panels will be unpacked on the truck and lifted off one by one. It is advised to have 2-3 people to help you to receive the shipment.
Sizing
Use the graphic below to help you measure the space you have and order the correct sized kennel
FAQ's
What makes the Pro-Series kennels last longer?
Our kennels are hot dip galvanized to a minimum of 5 mills thick after all welding and assembly which coats the outside and inside of every weld and surface. Other brand kennels will claim to be galvanized after welding, but close inspection will reveal that the welded joints have just been hand painted with galvanized paint which only coats the outside and leaves the inside raw metal which WILL rust.
What is the frame of the Pro-Series Kennels made of?
Each Pro-Series heavy duty kennel panel utilizes 1 ¼” square tubing frame with welded mitered corners for superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other brand kennels have frames that are wide open on top. Also, using square tube kennel frames provides a more positive means to secure two panels together.
What size is the welded wire mesh?
Our welded wire mesh has 2”x4” openings and 6 gauge wire. Every end of the mesh is inserted into a pre-drilled hole in the frame then welded. Inserting the ends into the frame before welding makes the entire panel much stronger and more importantly safer by eliminating broken welds that can cause wires to stick out and injure your pets.
What is the Handle made of?
Each Pro-Series kennel door utilizes a solid stainless steel lockable handle assembly which also includes an internal stainless steel spring that helps hold the latch closed to prevent your dog from opening the door. This makes for a safe and secure kennel and still allows for a convenient one-hand door opening. The handle is also designed to accept a padlock or clasp for a more secure application if needed.
How long is your warranty?
All TK Products Pro-Series kennels come with a 5-year warranty which greatly surpasses anyone in the kennel business.
Original: $2,584.12
-65%$2,584.12
$904.44Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Description
TK Products Pro-Series Enclosed Multi-Dog Kennel - Indoor/Outdoor Wire Kennel
TK Products Pro-Series enclosed multi-dog kennels are fully freestanding, four-sided welded wire kennel systems built for indoor and outdoor use. No wall required. Place them in a garage, barn, yard, utility room, or any open space where you need a secure, permanent kennel run. Available in 2-run through 6-run configurations across a full range of sizes, including the extra-large 10x10-foot run for giant breeds and high-capacity commercial facilities, all units stand 6 feet (72 inches) tall and ship complete with every piece of hardware needed for assembly.
These are the same Pro-Series panels used in the backless configuration, with the addition of a full rear panel on every run. The result is a completely self-contained kennel system that can be positioned anywhere on a flat surface, bolted to concrete, or anchored into grass or pea stone using the optional stainless steel adjustable feet.
AdeoPets has helped boarding facilities, animal shelters, breeders, grooming salons, veterinary practices, and multi-dog households configure TK Products kennel systems for over 7 years. Rated 4.9 stars across 626+ verified customer reviews, our team knows these products thoroughly. If you have questions about sizing, configuration, or building a custom kennel bank, call us at 888-979-5566 or start a live chat.
Key Features of the TK Pro-Series Enclosed Kennel
- Fully enclosed, four-sided freestanding kennel; no wall required
- Hot-dip galvanized after full assembly, 5 mils thick, rated for 100+ year service life per American Galvanizing Association standards
- 1.25-inch square tubing frame with welded mitered corners; closed top prevents debris entry and internal corrosion
- 6-gauge 2x4-inch welded wire mesh; wire ends inserted and welded inside the frame for no exposed sharp edges
- All stainless steel hardware: bolt assemblies, vibration-proof ny-lock nuts, door handles, and door latches
- Spring-loaded stainless steel lockable door latch with handles on both sides; one-handed operation; accepts padlock or carabiner
- 2-foot-wide door panel swings in or out; reversible for left- or right-hand installation; lifts free at 90 degrees for easy cleaning
- Panels raised 2 inches off the ground on plastic leg inserts for spray-out cleaning; optional stainless steel adjustable feet available for 2, 3, or 4-inch height on sloped concrete or soft ground
- Optional isolation panels in non-toxic black HDPE composite, 48 inches tall, for visual separation between runs
- Optional top mesh panels available for most popular sizes
- Available in 2-run through 6-run configurations; custom multi-run banks available on request
- Sizes from 3x4 up to 10x10 feet per run; all units 6 feet (72 inches) tall
- 5-year manufacturer warranty
- Made in the USA
** Note: kennels cannot be returned or exchanged
Why Buy a TK Kennel
TK Kennels is the industry leader for durability of use for indoor/outdoor dog kennels. Their manufacturing process is unmatched in the industry giving you a quality product that will also for years to come. Each completed panel is hot-dip galvanizing after welding and assembly to give it the strongest finish available (5 mills thick). TK Products is so confident in their product that they offer a 5-Year Manufacturer Warranty, the longest in the industry Other kennels will claim to be of the same quality but few measures up. Read below for all the details.
Custom Configurations and Large-Scale Builds
The standard product page covers 2 through 6-run configurations in the sizes listed above. For buyers who need more, AdeoPets builds custom kennel systems beyond the standard catalog regularly using TK Products panels.
Common custom configurations include 8-run, 10-run, 12-run, and larger kennel banks, back-to-back double rows with a shared centre aisle, L-shaped and U-shaped layouts to fit irregular spaces, and mixed-size installations where different run widths are combined across a single bank. The panels are standard TK Products units. The custom element is the configuration, the count, and the layout planning.
If you are outfitting a boarding facility, rescue organisation, veterinary practice, grooming salon, or any operation requiring more than 6 runs, contact us before placing an order. We will review your space, recommend the right configuration, and provide a written quote. Call 888-979-5566 or start a live chat.
Superior Design
All Pro-Series Kennels are built using 1 ¼” square tubing frame with welded mitered corners giving it superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other major brand kennels have frames that are wide open on top.
The square tube kennel frames provide a more effective means to secure two panels together. The square frame kennels are held together using stainless steel bolt assemblies that are designed to wrap around each frame for increased strength (see pictures above), unlike round tube framed kennels that use a round clamp system which often becomes loose and can rotate. Our bolt assembly includes all stainless steel bolts and vibration proof stainless steel ny-lock nuts. This design was chosen specifically based on years of experience with fail brackets.
Inside the frame is 6 gauge 2x4 welded wire mesh. The inside of the frame is pre-drilled around the entire inner perimeter; then each end of the wire mesh is inserted into the pre-drilled frame and welded around every wire. We have found this to be the most secure way to fasten the wire mesh to the frame while also eliminating exposed jagged or sharp edges that could injure your animal. This design also eliminates rattling of the fence like other chain link versions giving you the quietest kennel possible. Most other brands just weld the wire mesh to the surface of the frame every six to twelve inches which means some of the wire mesh ends can be bent out and injure your pet.
TK kennels are raised 2" off the ground with a leg for easy spray out cleaning and also come plastic leg inserts to help reduce wear and improve the corrosion resistance.
Optionally, we off a Stainless Steel foot that replaces the plastic leg insert and allows the side panels to be adjustable from 2” – 3” – 4” above grade for easy cleaning and sloped concrete installations. The large for is 3 ½” square and allows you to bolt the kennels to the concrete or works very well for placing the kennels on soft surfaces like grass or pea stone.
Door Panels
Each door panel has a 2-foot door which swings in-or-out. The door panel is also reversible offering a right or left-handed installation. The door hinge design allows for the door to be removed by lifting it straight up but only if the door is opened to at least 90 degrees, this is a handy feature for cleaning. These unique features truly make the TK Pro-Series a versatile kennel system.
Door Latch - Spring Loaded
The Door Latch is spring-loaded and made of solid stainless steel with an internal stainless spring that holds the latch shut and prevents your dog from opening the door. There is a handle on both sides of the kennel for ease of use, and the latch is lockable for your pet’s safety. The handle is easily used one-handed to make feeding time a breeze. Each latch has an eyelet that can be used to easily lock using a carabineer or similar item. If you have an escape artist consider upgrading to our quick-locking latch, which can be locked with the press of a button.
Optional Isolation Pannels
TK Isolation Panels are sold separately and a great to keep animals from interacting too much. They are made of a non-toxic black textured HDPE (composite). The HDPE is black all the way through so it will show fewer signs of wear or scratching as compared to steel or galvanized panels. It is impervious to cleaning chemicals and will not corrode or rust even if damaged. All our isolation panels are 48” tall and fastened to our wire mesh side panels using stainless steel brackets and screws. This means the panels can be added, moved or removed at any time to increase ventilation or install where needed.
Optional top Panels
We also offer optional top mesh panels for our more popular kennels. These top panels sit flush inside the kennel on six mounting tabs and held in place using the stainless steel self-drilling mounting screws that come with each panel.
TK Products Comprehensive 5 Year Warranty
- For five (5) years from the date of original purchase, TK Products LLC, warrants to the purchaser of this kennel that,
should it prove structurally defective by reason of improper workmanship and/or material, TK Products LLC, will repair or replace, at its option, any defective part of the kennel, customer is responsible for all shipping. Replacement parts are warranted for the remainder of the original period.
2. THIS WARRANTY DOES NOT COVER damage to the kennel caused by any animal, any physical alterations or abuse to or misuse of the kennel, any damage caused by the original purchaser or any third party, or any defects arising or discovered more than five (5) years from the original retail purchase date.
Frequently Asked Questions
What is the difference between the enclosed and backless TK Products kennel? The enclosed kennel is a fully freestanding, four-sided unit with panels on all sides plus a front door. It requires no wall and can be placed anywhere. The backless kennel has three enclosed sides and is open on the rear, designed to mount flush against an existing wall. Both use identical panels, hardware, and construction quality. If you have no wall to mount against, the enclosed version is the correct choice. If you are building against a wall or setting up an indoor/outdoor through-wall system, the backless version is the right choice.
Can the enclosed kennel be used outdoors year-round? Yes. The 5-mil hot-dip galvanized coating is the same standard used on outdoor infrastructure and is rated for long-term outdoor exposure in all climates, including high-humidity, high-rainfall, and freeze-thaw environments. Optional top mesh panels add weather protection overhead. The base kennel panels themselves require no additional treatment for outdoor use.
What sizes work best for large or giant breed dogs? For dogs over 80 pounds, a 4x8 or 4x10 run provides comfortable movement space. For giant breeds including Great Danes, Mastiffs, Irish Wolfhounds, and similar, a 5x10 or 10x10 run is recommended. The 10x10 configuration is the largest individual run in the TK Products lineup and provides over 100 square feet per dog.
Can I configure more than 6 runs? Yes. TK Products panels are fully modular and AdeoPets builds custom kennel banks with 8, 10, 12, or more runs regularly. We also help customers design back-to-back configurations, L-shaped layouts, and other custom floor plans. Call or chat with us to discuss your project and we will prepare a custom quote at no obligation.
Can interior divider panels be removed to create larger runs? Yes. Interior divider panels can be disconnected and removed if you want to temporarily combine adjacent runs into a larger space. This is common in boarding facilities that need flexibility depending on the size of dogs in their care on any given week.
How long does assembly take? Most TK Products kennel banks can be assembled by two people using basic hand tools in a few hours. All hardware is included. No welding or special equipment is required. Our team is available at 888-979-5566 if you have questions during setup.
What is the lead time and how does shipping work? TK Products kennels are normmaly instock and ship in 7 days from order placement. Orders ship from Michigan via freight carrier on a pallet. The freight company will contact you to schedule a delivery time. You will need two to three people on-site to receive the shipment, as liftgate service is not available for kennel panels. Panels are unloaded from the truck individually by hand.
Is the 5-year warranty transferable? The warranty covers structural defects due to improper workmanship or materials for five years from the original purchase date. It does not cover damage caused by animals, physical alteration, misuse, or abuse. Replacement parts under warranty are covered for the remainder of the original warranty period. Contact AdeoPets at 888-979-5566 or [email protected] for warranty support.
Sizing Guide for Enclosed Multi-Dog Kennels
All TK Products enclosed kennels are 6 feet (72 inches) tall. The width dimension refers to the door panel and the width of each individual run. The length dimension refers to the depth of the run from front door to back panel.
Width options: 3 feet, 4 feet, 5 feet, 10 feet. Length options: 4 feet, 5 feet, 6 feet, 8 feet, 10 feet. Run counts: 2 through 6 in a single bank.
As a general sizing guide: a 3x4 or 3x5 run is suitable for small breeds and puppies. A 4x4 or 4x5 run works well for medium dogs. A 4x8 or 4x10 run gives large breeds comfortable movement space. A 5x8, 5x10, or 10x10 run is recommended for giant breeds, working dogs with high energy needs, or commercial facilities prioritising animal welfare standards.
The 10x10 configuration is the largest individual run in the TK Products lineup. At over 100 square feet per run, it is primarily used by animal shelters, boarding facilities managing large or giant breeds, breeders with multiple dogs per space, and K9 training programs. A 6-run bank of 10x10 kennels represents a full commercial kennel installation.
For custom configurations including larger run counts, unusual floor plan shapes, or back-to-back double-row builds, contact AdeoPets before ordering. We prepare custom quotes at no obligation and can advise on panel count, layout, and logistics for any scale of project. Call 888-979-5566 or use live chat.
Shipping
TK Product Kennels Ship from Michigan via Freight Carrier
- TK Products can take several weeks or more to manufacture, please contact us if you need a specific timeframe for your order.
- Transit times can vary by location and time of year, freight carrier do not guarantee a delivery date, please allow 5-15 days for transit
Freight Shipping
Freight shipping is used when items are over 145 lbs or very large in size. Our standard freight shipping will arrive to you in a tractor-trailer/18-wheeler. Once the freight driver is in your area, they will contact you directly to arrange for a delivery time.
Your order will arrive on a pallet delivered by a commercial LTL carrier. The trucks are usually semi-trucks, tractor-trailers/full-size 18 wheelers. The freight company will call you a day or so before they deliver to schedule a time to deliver. You will need to have help ready when your shipment arrives as the freight driver will not unload for you. If you do not have a forklift, the pallets of kennels can be unwrapped on the truck and each kennel panel can then be easily lifted off the truck.
Liftgate Service:
Because of the large size of these kennels, a liftgate is not an option. The kennel panels will be unpacked on the truck and lifted off one by one. It is advised to have 2-3 people to help you to receive the shipment.
Sizing
Use the graphic below to help you measure the space you have and order the correct sized kennel
FAQ's
What makes the Pro-Series kennels last longer?
Our kennels are hot dip galvanized to a minimum of 5 mills thick after all welding and assembly which coats the outside and inside of every weld and surface. Other brand kennels will claim to be galvanized after welding, but close inspection will reveal that the welded joints have just been hand painted with galvanized paint which only coats the outside and leaves the inside raw metal which WILL rust.
What is the frame of the Pro-Series Kennels made of?
Each Pro-Series heavy duty kennel panel utilizes 1 ¼” square tubing frame with welded mitered corners for superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other brand kennels have frames that are wide open on top. Also, using square tube kennel frames provides a more positive means to secure two panels together.
What size is the welded wire mesh?
Our welded wire mesh has 2”x4” openings and 6 gauge wire. Every end of the mesh is inserted into a pre-drilled hole in the frame then welded. Inserting the ends into the frame before welding makes the entire panel much stronger and more importantly safer by eliminating broken welds that can cause wires to stick out and injure your pets.
What is the Handle made of?
Each Pro-Series kennel door utilizes a solid stainless steel lockable handle assembly which also includes an internal stainless steel spring that helps hold the latch closed to prevent your dog from opening the door. This makes for a safe and secure kennel and still allows for a convenient one-hand door opening. The handle is also designed to accept a padlock or clasp for a more secure application if needed.
How long is your warranty?
All TK Products Pro-Series kennels come with a 5-year warranty which greatly surpasses anyone in the kennel business.
