TK Products Single Dog Kennel | Enclosed Indoor & Outdoor
Description
TK Products Pro-Series Single Dog Kennel - Indoor/Outdoor Wire Enclosed Kennel
TK Products single dog kennel is a fully enclosed, four-sided welded wire run for one dog, built to the same professional standard used in commercial boarding facilities, animal shelters, and veterinary operations. It is not a temporary solution or a starter crate. It is a permanent kennel installation, sized for your dog, placed wherever you need it, and built to hold up under daily use for years without rusting, loosening, or degrading.
Available in 16 sizes from 3x4 feet up to 10x10 feet, all standing 6 feet (72 inches) tall, every configuration ships complete with all hardware needed for assembly. If your needs grow, TK Products single kennels are fully modular. You can add a second run, a third, or more at any time by connecting additional panels to your existing unit, without replacing what you already own.
Built to Last: Why TK Products Outperforms Consumer-Grade Kennels
The difference between a TK Products kennel and a standard chain-link or box-store run comes down to one manufacturing decision that most competitors skip. TK Products hot-dip galvanizes every panel after full welding and assembly, submerging the complete unit so the 5-mil zinc coating penetrates the outside, the inside, and every weld joint simultaneously. Most competing kennels are galvanized before welding, which leaves bare metal at every weld point. In an outdoor environment with rain, cleaning spray, and pet waste, those bare weld joints rust first. Often within two to three seasons.
A 5-mil hot-dip galvanized coating meets the same specification used on bridges, highway guardrails, and municipal infrastructure. According to the American Galvanizing Association, a coating of this thickness on structural steel provides an expected service life of 100 years or more under typical outdoor conditions. For a kennel that will be pressure-washed, rained on, and exposed to cleaning chemicals year after year, that is the relevant standard.
The frame is 1.25-inch square tubing with welded mitered corners. The mitered top seals the frame cavity, preventing debris and moisture from entering and corroding the structure from the inside, a failure point that is common in open-top round-tube frames. Panels connect using stainless steel bolt assemblies with vibration-proof ny-lock nuts, a system that stays tight through years of use without retightening. The 6-gauge 2x4-inch welded wire mesh is fastened by inserting each wire end into pre-drilled holes in the frame interior before welding, eliminating sharp exposed edges and the wire rattle common in chain-link designs.
Features:
- 4-sided kennel, fully enclosed
- Superior "Quiet" Construction, no sharp edges
- Hot-dip galvanized panels and wire (5 mills thick)
- Stainless steel spring-loaded door latch
- 4 plastic press-in feet
- 8 stainless steel bolt assemblies
- 6 ft tall (72")
- Build as you go - Addition runs can be added on later
- 5 Year Manufacturer Warranty!
- Made in the USA
** Note: kennels cannot be returned or exchanged
Superior Design
All Pro-Series Kennels are built using 1 ¼” square tubing frame with welded mitered corners giving it superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other major brand kennels have frames that are wide open on top.
The square tube kennel frames provide a more effective means to secure two panels together. The square frame kennels are held together using stainless steel bolt assemblies that are designed to wrap around each frame for increased strength (see pictures above), unlike round tube framed kennels that use a round clamp system which often becomes loose and can rotate. Our bolt assembly includes all stainless steel bolts and vibration proof stainless steel ny-lock nuts. This design was chosen specifically based on years of experience with fail brackets.
Inside the frame is 6 gauge 2x4 welded wire mesh. The inside of the frame is pre-drilled around the entire inner perimeter; then each end of the wire mesh is inserted into the pre-drilled frame and welded around every wire. We have found this to be the most secure way to fasten the wire mesh to the frame while also eliminating exposed jagged or sharp edges that could injure your animal. This design also eliminates rattling of the fence like other chain link versions giving you the quietest kennel possible. Most other brands just weld the wire mesh to the surface of the frame every six to twelve inches which means some of the wire mesh ends can be bent out and injure your pet.
TK kennels are raised 2" off the ground with a leg for easy spray out cleaning and also come plastic leg inserts to help reduce wear and improve the corrosion resistance.
Optionally, we off a Stainless Steel foot that replaces the plastic leg insert and allows the side panels to be adjustable from 2” – 3” – 4” above grade for easy cleaning and sloped concrete installations. The large for is 3 ½” square and allows you to bolt the kennels to the concrete or works very well for placing the kennels on soft surfaces like grass or pea stone.
Door Panels
Each door panel has a 2-foot door which swings in-or-out. The door panel is also reversible offering a right or left-handed installation. The door hinge design allows for the door to be removed by lifting it straight up but only if the door is opened to at least 90 degrees, this is a handy feature for cleaning. These unique features truly make the TK Pro-Series a versatile kennel system.
Door Latch - Spring Loaded
The Door Latch is spring-loaded and made of solid stainless steel with an internal stainless spring that holds the latch shut and prevents your dog from opening the door. There is a handle on both sides of the kennel for ease of use, and the latch is lockable for your pet’s safety. The handle is easily used one-handed to make feeding time a breeze. Each latch has an eyelet that can be used to easily lock using a carabineer or similar item. If you have an escape artist consider upgrading to our quick-locking latch, which can be locked with the press of a button.
The Right Single Kennel for Your Dog
Choosing the right size comes down to your dog's size, energy level, and how the kennel will be used. All TK Products single kennels are 6 feet (72 inches) tall. Width refers to the door panel dimension and the overall kennel width. Length refers to the depth of the run from the front door to the back wall.
For small to medium dogs up to approximately 40 pounds, a 3x4 or 3x5 kennel provides adequate space for resting and short-term containment. A 3x6 or 4x4 configuration gives a medium dog more comfortable movement room. For large breeds over 60 pounds, a 4x6, 4x8, or 4x10 run is the recommended starting point. High-energy working breeds, large retrievers, and dogs that pace benefit from the additional length a 4x8 or 4x10 provides. For giant breeds including Great Danes, Mastiffs, and Irish Wolfhounds, a 5x8, 5x10, or 10x10 run is appropriate. At over 100 square feet, the 10x10 configuration gives a giant breed genuine room to move.
Start with One Run, Expand When You're Ready
One of the most practical features of the TK Products system is its modularity. Every single kennel is designed to accept additional panels on either side, so a buyer who starts with one run can add a second, third, or more runs at any point without replacing the original kennel. The connection system uses the same stainless steel bolt assembly throughout, so existing panels integrate with new panels exactly as they did from the factory.
This matters for two types of buyers. First, those who start with one dog and acquire another, or who need to house dogs separately during feeding, heat, or recovery. Second, buyers who want to trial the product at a smaller investment before committing to a full multi-run system. A single 4x8 kennel at $1,866 is a lower initial commitment than a 4-run bank, but it can grow into one.
When you are ready to expand, contact AdeoPets before ordering additional panels. Our team will confirm which panel sizes you need based on your existing kennel dimensions and prepare the order correctly.
Optional Isolation Pannels
TK Isolation Panels are sold separately and great for keeping animals from interacting too much. Made of a non-toxic black textured HDPE (composite). The HDPE is black all the way through so it will show fewer signs of wear or scratching as compared to steel or galvanized panels. It is impervious to cleaning chemicals and will not corrode or rust even if damaged. All our isolation panels are 48” tall and fastened to our wire mesh side panels using stainless steel brackets and screws. This means the panels can be added, moved or removed at any time to increase ventilation or install where needed.
Optional top Panels
We also offer optional top mesh panels for our more popular kennels. These top panels sit flush inside the kennel on six mounting tabs and held in place using the stainless steel self-drilling mounting screws that come with each panel.
TK Products Comprehensive 5 Year Warranty
1. For five (5) years from the date of original purchase, TK Products LLC, warrants to the purchaser of this kennel that,
should it prove structurally defective by reason of improper workmanship and/or material, TK Products LLC, will repair or replace, at its option, any defective part of the kennel, customer is responsible for all shipping. Replacement parts are warranted for the remainder of the original period.
2. THIS WARRANTY DOES NOT COVER damage to the kennel caused by any animal, any physical alteration or abuse to or misuse of the kennel, any damage caused by the original purchaser or any third party, or any defects arising or discovered more than five (5) years from the original retail purchase date.
Frequently Asked Questions
Can I add more runs to a single kennel later? Yes. TK Products panels are modular and designed to expand. You can connect additional side panels, end panels, and door panels to your existing single kennel at any time to create a 2-run, 3-run, or larger bank. Contact us before ordering expansion panels so we can confirm the correct sizes for your configuration.
What is the difference between the single kennel and the enclosed multi-dog kennel? They use identical panels, hardware, and construction. The single kennel is one complete, standalone run. The enclosed multi-dog kennel is a bank of 2 through 6 runs assembled together as a unit. If you need one run now but may want more later, the single kennel is the right starting point. If you need multiple runs from the start, the multi-dog kennel is more cost-effective per run.
Can this kennel be used outdoors year-round? Yes. The 5-mil hot-dip galvanized finish is rated for long-term outdoor exposure in all climates. No additional treatment or cover is required for outdoor use, though an optional roof panel adds overhead protection and escape prevention.
What size kennel do I need for a large breed dog? For dogs between 60 and 100 pounds, a 4x8 or 4x10 run provides comfortable space. For dogs over 100 pounds or giant breeds, a 5x8, 5x10, or 10x10 is recommended. Call us at 888-979-5566 if you want a sizing recommendation for your specific dog.
How long does assembly take? Most single kennel configurations can be assembled by one or two people using basic hand tools in under an hour. All hardware is included. No welding or special equipment is required.
What is the lead time and how does shipping work? TK Products kennels are made to order. Current lead time is approximately 6 weeks. Kennels ship from Michigan via freight carrier on a pallet. The freight company will contact you to schedule delivery. You will need one to two people on site to receive the shipment, as liftgate service is not available.
Can the kennel be anchored to concrete? Yes. The optional stainless steel adjustable leg inserts include a 3.5-inch square base plate with bolt holes for anchoring to a concrete slab. This is recommended for outdoor installations in areas with high wind or where additional security is needed.
Shipping
TK Product Kennels Ship from Michigan via Freight Carrier
- TK Products can take several weeks or more to manufacture, please contact us if you need a specific timeframe for your order.
- Transit times can vary by location and time of year, freight carrier do not guarantee a delivery date, please allow 5-15 days for transit
Freight Shipping
Freight shipping is used when items are over 145 lbs or very large in size. Our standard freight shipping will arrive to you in a tractor-trailer/18-wheeler. Once the freight driver is in your area, they will contact you directly to arrange for a delivery time.
Because of the large size of these kennels, a liftgate is not an option. The kennel panels will be unpacked on the truck and lifted off one by one. It is advised to have the manpower needed to unload the shipment yourself.
Your order will arrive on a pallet delivered by a commercial LTL carrier. The trucks are usually semi-trucks, tractor-trailers/full-size 18 wheelers. The freight company will call you a day or so before they deliver to schedule a time to deliver. You will need to have help ready when your shipment arrives as the freight driver will not unload for you. If you do not have a forklift, the pallets of kennels can be unwrapped on the truck and each kennel panel can then be easily lifted off the truck.
FAQ's
What makes the Pro-Series kennels last longer?
Our kennels are hot dip galvanized to a minimum of 5 mills thick after all welding and assembly which coats the outside and inside of every weld and surface. Other brand kennels will claim to be galvanized after welding, but close inspection will reveal that the welded joints have just been hand painted with galvanized paint which only coats the outside and leaves the inside raw metal which WILL rust.
What is the frame of the Pro-Series Kennels made of?
Each Pro-Series heavy duty kennel panel utilizes 1 ¼” square tubing frame with welded mitered corners for superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other brand kennels have frames that are wide open on top. Also, using square tube kennel frames provides a more positive means to secure two panels together.
What size is the welded wire mesh?
Our welded wire mesh has 2”x4” openings and 6 gauge wire. Every end of the mesh is inserted into a pre-drilled hole in the frame then welded. Inserting the ends into the frame before welding makes the entire panel much stronger and more importantly safer by eliminating broken welds that can cause wires to stick out and injure your pets.
What is the Handle made of?
Each Pro-Series kennel door utilizes a solid stainless steel lockable handle assembly which also includes an internal stainless steel spring that helps hold the latch closed to prevent your dog from opening the door. This makes for a safe and secure kennel and still allows for a convenient one-hand door opening. The handle is also designed to accept a padlock or clasp for a more secure application if needed.
How long is your warranty?
All TK Products Pro-Series kennels come with a 5-year warranty which greatly surpasses anyone in the kennel business.
Original: $1,443.98
-65%$1,443.98
$505.39Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Description
TK Products Pro-Series Single Dog Kennel - Indoor/Outdoor Wire Enclosed Kennel
TK Products single dog kennel is a fully enclosed, four-sided welded wire run for one dog, built to the same professional standard used in commercial boarding facilities, animal shelters, and veterinary operations. It is not a temporary solution or a starter crate. It is a permanent kennel installation, sized for your dog, placed wherever you need it, and built to hold up under daily use for years without rusting, loosening, or degrading.
Available in 16 sizes from 3x4 feet up to 10x10 feet, all standing 6 feet (72 inches) tall, every configuration ships complete with all hardware needed for assembly. If your needs grow, TK Products single kennels are fully modular. You can add a second run, a third, or more at any time by connecting additional panels to your existing unit, without replacing what you already own.
Built to Last: Why TK Products Outperforms Consumer-Grade Kennels
The difference between a TK Products kennel and a standard chain-link or box-store run comes down to one manufacturing decision that most competitors skip. TK Products hot-dip galvanizes every panel after full welding and assembly, submerging the complete unit so the 5-mil zinc coating penetrates the outside, the inside, and every weld joint simultaneously. Most competing kennels are galvanized before welding, which leaves bare metal at every weld point. In an outdoor environment with rain, cleaning spray, and pet waste, those bare weld joints rust first. Often within two to three seasons.
A 5-mil hot-dip galvanized coating meets the same specification used on bridges, highway guardrails, and municipal infrastructure. According to the American Galvanizing Association, a coating of this thickness on structural steel provides an expected service life of 100 years or more under typical outdoor conditions. For a kennel that will be pressure-washed, rained on, and exposed to cleaning chemicals year after year, that is the relevant standard.
The frame is 1.25-inch square tubing with welded mitered corners. The mitered top seals the frame cavity, preventing debris and moisture from entering and corroding the structure from the inside, a failure point that is common in open-top round-tube frames. Panels connect using stainless steel bolt assemblies with vibration-proof ny-lock nuts, a system that stays tight through years of use without retightening. The 6-gauge 2x4-inch welded wire mesh is fastened by inserting each wire end into pre-drilled holes in the frame interior before welding, eliminating sharp exposed edges and the wire rattle common in chain-link designs.
Features:
- 4-sided kennel, fully enclosed
- Superior "Quiet" Construction, no sharp edges
- Hot-dip galvanized panels and wire (5 mills thick)
- Stainless steel spring-loaded door latch
- 4 plastic press-in feet
- 8 stainless steel bolt assemblies
- 6 ft tall (72")
- Build as you go - Addition runs can be added on later
- 5 Year Manufacturer Warranty!
- Made in the USA
** Note: kennels cannot be returned or exchanged
Superior Design
All Pro-Series Kennels are built using 1 ¼” square tubing frame with welded mitered corners giving it superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other major brand kennels have frames that are wide open on top.
The square tube kennel frames provide a more effective means to secure two panels together. The square frame kennels are held together using stainless steel bolt assemblies that are designed to wrap around each frame for increased strength (see pictures above), unlike round tube framed kennels that use a round clamp system which often becomes loose and can rotate. Our bolt assembly includes all stainless steel bolts and vibration proof stainless steel ny-lock nuts. This design was chosen specifically based on years of experience with fail brackets.
Inside the frame is 6 gauge 2x4 welded wire mesh. The inside of the frame is pre-drilled around the entire inner perimeter; then each end of the wire mesh is inserted into the pre-drilled frame and welded around every wire. We have found this to be the most secure way to fasten the wire mesh to the frame while also eliminating exposed jagged or sharp edges that could injure your animal. This design also eliminates rattling of the fence like other chain link versions giving you the quietest kennel possible. Most other brands just weld the wire mesh to the surface of the frame every six to twelve inches which means some of the wire mesh ends can be bent out and injure your pet.
TK kennels are raised 2" off the ground with a leg for easy spray out cleaning and also come plastic leg inserts to help reduce wear and improve the corrosion resistance.
Optionally, we off a Stainless Steel foot that replaces the plastic leg insert and allows the side panels to be adjustable from 2” – 3” – 4” above grade for easy cleaning and sloped concrete installations. The large for is 3 ½” square and allows you to bolt the kennels to the concrete or works very well for placing the kennels on soft surfaces like grass or pea stone.
Door Panels
Each door panel has a 2-foot door which swings in-or-out. The door panel is also reversible offering a right or left-handed installation. The door hinge design allows for the door to be removed by lifting it straight up but only if the door is opened to at least 90 degrees, this is a handy feature for cleaning. These unique features truly make the TK Pro-Series a versatile kennel system.
Door Latch - Spring Loaded
The Door Latch is spring-loaded and made of solid stainless steel with an internal stainless spring that holds the latch shut and prevents your dog from opening the door. There is a handle on both sides of the kennel for ease of use, and the latch is lockable for your pet’s safety. The handle is easily used one-handed to make feeding time a breeze. Each latch has an eyelet that can be used to easily lock using a carabineer or similar item. If you have an escape artist consider upgrading to our quick-locking latch, which can be locked with the press of a button.
The Right Single Kennel for Your Dog
Choosing the right size comes down to your dog's size, energy level, and how the kennel will be used. All TK Products single kennels are 6 feet (72 inches) tall. Width refers to the door panel dimension and the overall kennel width. Length refers to the depth of the run from the front door to the back wall.
For small to medium dogs up to approximately 40 pounds, a 3x4 or 3x5 kennel provides adequate space for resting and short-term containment. A 3x6 or 4x4 configuration gives a medium dog more comfortable movement room. For large breeds over 60 pounds, a 4x6, 4x8, or 4x10 run is the recommended starting point. High-energy working breeds, large retrievers, and dogs that pace benefit from the additional length a 4x8 or 4x10 provides. For giant breeds including Great Danes, Mastiffs, and Irish Wolfhounds, a 5x8, 5x10, or 10x10 run is appropriate. At over 100 square feet, the 10x10 configuration gives a giant breed genuine room to move.
Start with One Run, Expand When You're Ready
One of the most practical features of the TK Products system is its modularity. Every single kennel is designed to accept additional panels on either side, so a buyer who starts with one run can add a second, third, or more runs at any point without replacing the original kennel. The connection system uses the same stainless steel bolt assembly throughout, so existing panels integrate with new panels exactly as they did from the factory.
This matters for two types of buyers. First, those who start with one dog and acquire another, or who need to house dogs separately during feeding, heat, or recovery. Second, buyers who want to trial the product at a smaller investment before committing to a full multi-run system. A single 4x8 kennel at $1,866 is a lower initial commitment than a 4-run bank, but it can grow into one.
When you are ready to expand, contact AdeoPets before ordering additional panels. Our team will confirm which panel sizes you need based on your existing kennel dimensions and prepare the order correctly.
Optional Isolation Pannels
TK Isolation Panels are sold separately and great for keeping animals from interacting too much. Made of a non-toxic black textured HDPE (composite). The HDPE is black all the way through so it will show fewer signs of wear or scratching as compared to steel or galvanized panels. It is impervious to cleaning chemicals and will not corrode or rust even if damaged. All our isolation panels are 48” tall and fastened to our wire mesh side panels using stainless steel brackets and screws. This means the panels can be added, moved or removed at any time to increase ventilation or install where needed.
Optional top Panels
We also offer optional top mesh panels for our more popular kennels. These top panels sit flush inside the kennel on six mounting tabs and held in place using the stainless steel self-drilling mounting screws that come with each panel.
TK Products Comprehensive 5 Year Warranty
1. For five (5) years from the date of original purchase, TK Products LLC, warrants to the purchaser of this kennel that,
should it prove structurally defective by reason of improper workmanship and/or material, TK Products LLC, will repair or replace, at its option, any defective part of the kennel, customer is responsible for all shipping. Replacement parts are warranted for the remainder of the original period.
2. THIS WARRANTY DOES NOT COVER damage to the kennel caused by any animal, any physical alteration or abuse to or misuse of the kennel, any damage caused by the original purchaser or any third party, or any defects arising or discovered more than five (5) years from the original retail purchase date.
Frequently Asked Questions
Can I add more runs to a single kennel later? Yes. TK Products panels are modular and designed to expand. You can connect additional side panels, end panels, and door panels to your existing single kennel at any time to create a 2-run, 3-run, or larger bank. Contact us before ordering expansion panels so we can confirm the correct sizes for your configuration.
What is the difference between the single kennel and the enclosed multi-dog kennel? They use identical panels, hardware, and construction. The single kennel is one complete, standalone run. The enclosed multi-dog kennel is a bank of 2 through 6 runs assembled together as a unit. If you need one run now but may want more later, the single kennel is the right starting point. If you need multiple runs from the start, the multi-dog kennel is more cost-effective per run.
Can this kennel be used outdoors year-round? Yes. The 5-mil hot-dip galvanized finish is rated for long-term outdoor exposure in all climates. No additional treatment or cover is required for outdoor use, though an optional roof panel adds overhead protection and escape prevention.
What size kennel do I need for a large breed dog? For dogs between 60 and 100 pounds, a 4x8 or 4x10 run provides comfortable space. For dogs over 100 pounds or giant breeds, a 5x8, 5x10, or 10x10 is recommended. Call us at 888-979-5566 if you want a sizing recommendation for your specific dog.
How long does assembly take? Most single kennel configurations can be assembled by one or two people using basic hand tools in under an hour. All hardware is included. No welding or special equipment is required.
What is the lead time and how does shipping work? TK Products kennels are made to order. Current lead time is approximately 6 weeks. Kennels ship from Michigan via freight carrier on a pallet. The freight company will contact you to schedule delivery. You will need one to two people on site to receive the shipment, as liftgate service is not available.
Can the kennel be anchored to concrete? Yes. The optional stainless steel adjustable leg inserts include a 3.5-inch square base plate with bolt holes for anchoring to a concrete slab. This is recommended for outdoor installations in areas with high wind or where additional security is needed.
Shipping
TK Product Kennels Ship from Michigan via Freight Carrier
- TK Products can take several weeks or more to manufacture, please contact us if you need a specific timeframe for your order.
- Transit times can vary by location and time of year, freight carrier do not guarantee a delivery date, please allow 5-15 days for transit
Freight Shipping
Freight shipping is used when items are over 145 lbs or very large in size. Our standard freight shipping will arrive to you in a tractor-trailer/18-wheeler. Once the freight driver is in your area, they will contact you directly to arrange for a delivery time.
Because of the large size of these kennels, a liftgate is not an option. The kennel panels will be unpacked on the truck and lifted off one by one. It is advised to have the manpower needed to unload the shipment yourself.
Your order will arrive on a pallet delivered by a commercial LTL carrier. The trucks are usually semi-trucks, tractor-trailers/full-size 18 wheelers. The freight company will call you a day or so before they deliver to schedule a time to deliver. You will need to have help ready when your shipment arrives as the freight driver will not unload for you. If you do not have a forklift, the pallets of kennels can be unwrapped on the truck and each kennel panel can then be easily lifted off the truck.
FAQ's
What makes the Pro-Series kennels last longer?
Our kennels are hot dip galvanized to a minimum of 5 mills thick after all welding and assembly which coats the outside and inside of every weld and surface. Other brand kennels will claim to be galvanized after welding, but close inspection will reveal that the welded joints have just been hand painted with galvanized paint which only coats the outside and leaves the inside raw metal which WILL rust.
What is the frame of the Pro-Series Kennels made of?
Each Pro-Series heavy duty kennel panel utilizes 1 ¼” square tubing frame with welded mitered corners for superior strength and appearance. The top mitered corner design also eliminates all dirt and debris from entering the top of the frame and corroding it from the inside out. Most of the other brand kennels have frames that are wide open on top. Also, using square tube kennel frames provides a more positive means to secure two panels together.
What size is the welded wire mesh?
Our welded wire mesh has 2”x4” openings and 6 gauge wire. Every end of the mesh is inserted into a pre-drilled hole in the frame then welded. Inserting the ends into the frame before welding makes the entire panel much stronger and more importantly safer by eliminating broken welds that can cause wires to stick out and injure your pets.
What is the Handle made of?
Each Pro-Series kennel door utilizes a solid stainless steel lockable handle assembly which also includes an internal stainless steel spring that helps hold the latch closed to prevent your dog from opening the door. This makes for a safe and secure kennel and still allows for a convenient one-hand door opening. The handle is also designed to accept a padlock or clasp for a more secure application if needed.
How long is your warranty?
All TK Products Pro-Series kennels come with a 5-year warranty which greatly surpasses anyone in the kennel business.
